SPRAY fragrance atomizer

SPRAY Device INOX for Use with Aerosol Spray: The Most Economical Scenting Solution

Ideal for spaces and locations without electricity supply. Automatic spraying with programmable timing and uniform fragrance diffusion. Extremely quiet operation, energy-saving and environmentally friendly, with ergonomic design. Covers areas up to 90 sq.m.

Features:

• Microcomputer control (LCD screen)

• Automatic energy-saving chip – increased battery life

• High-quality engineering plastic components

• Compatible with Sanko 250ml aerosol sprays

• Power supply: 2 AA (1.5V) batteries – not included

• Low-cost way to freshen indoor air

• Digital functions: Day / Night / 24-hour mode, with selectable start or stop time

• Adjustable interval time between sprays (1–60 minutes)

• Weight: 400g

• Dimensions: 9.5 x 9.5 x 22.5 cm

Application Areas:
Spaces such as:

• WC – Common areas

• Hallways

• Cafés

• Bakeries

An ideal solution for any small to medium indoor space.

Instructions for Use:

1. Open the front cover by pressing the button located on the top of the device.

2. Insert 2 AA batteries on the left side.

3. On the right, flip the small switch upwards to turn the device on.

4. Below the screen, you’ll see 7 black buttons:

To activate the device:

• Press ON/OFF to enable operation.
  On the screen, "ON" and "START" will appear.

Now you're ready to program it:
From left to right, the buttons are:

• CHECK: Triggers a test spray.
  CAUTION: Only use this function with a spray can inserted. Otherwise, the mechanism may stay stuck in the downward position.

• MODE: Hold this button for 2 seconds to enter the settings menu. The LCD will display available functions:
  ON, OFF, START, STOP, SPRAY, INTERVAL, WEEK, CLOCK

• WEEK: Set the day of the week

• HOUR: Set the hour

• MIN: Set the minutes

• ON/OFF: Turns the device on or off

Step-by-step Programming:

1. Hold MODE for 2 seconds.

2. On the START screen: Set the time you want the device to begin spraying using HOUR and MIN.

3. Press MODE to move to the STOP screen: Set the time to stop spraying.

4. Press MODE to skip COUNT screen (no changes needed).

5. Press MODE to go to the INTERVAL screen:
   This sets the time between sprays. The higher the interval, the lighter the scent in the room.
   For stronger intensity, set INTERVAL to 5 or 7.
   Lower INTERVAL = More sprays = Shorter can lifespan.
   Adjust with MIN button.

6. Press MODE to go to WEEK screen:
   Select which days the device will operate. Use the WEEK button to add/remove Saturday or weekends.

7. Press MODE to go to CLOCK screen:
   Set the current time and day. This must be accurate.
   Use HOUR and MIN for time.
   For the day of the week, use WEEK (1=Monday, 2=Tuesday, etc.).

8. Finally, press MODE once more to return to the main menu.
   Your device is now ready to operate.

Battery Life:
2 AA batteries last about 6–10 months.

Installation:
Mount the device on the wall at a height of about 1.80–1.90m.
For best performance, place it centrally in the room for optimal fragrance diffusion.
Always mount it on a stable surface, free of obstacles in front.